Magnetic Guidance for Linear Drives

Linear drives provide many new attractive solutions for the material transportation and processing in the manufacturing industry. With no mechanical transmission elements, they enable high dynamics and rigidity as well as low installation- and low maintenance-costs. That performance can give the linear motor system a better precision, a higher acceleration and a higher speed of the moving part. Therefore, the material transportation and processing using linear motors is studied and applied increasingly in manufacturing industry. For these applications, the linear motor is typically with stationary long primary and a short moving secondary. As the secondary part is passive, no energy transmission is required between the moving and stationary part, avoiding the use of brushes or inductive transmission. The motor type best suited for the mentioned applications is the synchronous one with permanent magnets, because of its higher efficiency, compactness, but most important because it allows a higher air-gap. In the usual approach, the linear motor is only used for thrust force production. The guidance is usually implemented by a mechanical assembly. The guidance constrains the movement to the longitudinal displacement, fixing the lateral and vertical displacement: yaw, roll and pitch. To achieve the necessary precision of the movement, accurate mechanical guidance is required. Such the mechanical assembly can be complex and source of high friction. In this dissertation, a research of an active guiding system is presented. The purpose of this research is finding out a solution for the material transportation and processing applications. The target is a linear drive system, which can reduce the complicated mechanical structure. In additions, the passive vehicle is also necessary. The result of the research is PM-synchronous linear motors with long and double-sided primaries. In the system, the lateral displacement and the yaw angle are controlled while a simple wheel-rail system fixes the vertical displacement. This combination of the magnetic and mechanical guidance offers a good trade-off among the complexity of the control, actuators and mechanics, when considering industrial applications. To allow multiple vehicles traveling simultaneously and independently on the guide-way (each vehicle is controlled by an individual part of the guide-way), the double side primary is separated into segments. With that structure, flexible-operating methods can be implemented. That is very useful in process-integrated material handling where different speeds of material carriers in each processing station are necessary. Another advantage of segmented structure is the energy saving. The power is supplied only to the segment or the two consecutive segments in which the vehicle runs over. In one segment, each side of the primary is supplied by its own inverter, allowing the necessary degree of freedom to control the lateral position and the yaw angle in addition to the thrust control. In order to make the vehicle completely passive, a capacitive sensor is proposed and implemented to measure the lateral position and the yaw angle. The sensor has active parts installed on the guide-way and passive parts on the vehicle. The mathematical analysis and the finite element method (FEM) are used to analysis the proposed system. With the analysed results, the control for the system is investigated in detail. Hardware and software for the experimental system is developed and implemented. The analysed results and the experimental results validate the proposed system. That gives a new solution for the material transportation and processing application using linear synchronous motors

Magnetic Guidance for Linear Drives

Linear drives provide many new attractive solutions for the material transportation and processing in the manufacturing industry. With no mechanical transmission elements, they enable high dynamics and rigidity as well as low installation- and low maintenance-costs. That performance can give the linear motor system a better precision, a higher acceleration and a higher speed of the moving part. Therefore, the material transportation and processing using linear motors is studied and applied increasingly in manufacturing industry. For these applications, the linear motor is typically with stationary long primary and a short moving secondary. As the secondary part is passive, no energy transmission is required between the moving and stationary part, avoiding the use of brushes or inductive transmission. The motor type best suited for the mentioned applications is the synchronous one with permanent magnets, because of its higher efficiency, compactness, but most important because it allows a higher air-gap. In the usual approach, the linear motor is only used for thrust force production. The guidance is usually implemented by a mechanical assembly. The guidance constrains the movement to the longitudinal displacement, fixing the lateral and vertical displacement: yaw, roll and pitch. To achieve the necessary precision of the movement, accurate mechanical guidance is required. Such the mechanical assembly can be complex and source of high friction. In this dissertation, a research of an active guiding system is presented. The purpose of this research is finding out a solution for the material transportation and processing applications. The target is a linear drive system, which can reduce the complicated mechanical structure. In additions, the passive vehicle is also necessary. The result of the research is PM-synchronous linear motors with long and double-sided primaries. In the system, the lateral displacement and the yaw angle are controlled while a simple wheel-rail system fixes the vertical displacement. This combination of the magnetic and mechanical guidance offers a good trade-off among the complexity of the control, actuators and mechanics, when considering industrial applications. To allow multiple vehicles traveling simultaneously and independently on the guide-way (each vehicle is controlled by an individual part of the guide-way), the double side primary is separated into segments. With that structure, flexible-operating methods can be implemented. That is very useful in process-integrated material handling where different speeds of material carriers in each processing station are necessary. Another advantage of segmented structure is the energy saving. The power is supplied only to the segment or the two consecutive segments in which the vehicle runs over. In one segment, each side of the primary is supplied by its own inverter, allowing the necessary degree of freedom to control the lateral position and the yaw angle in addition to the thrust control. In order to make the vehicle completely passive, a capacitive sensor is proposed and implemented to measure the lateral position and the yaw angle. The sensor has active parts installed on the guide-way and passive parts on the vehicle. The mathematical analysis and the finite element method (FEM) are used to analysis the proposed system. With the analysed results, the control for the system is investigated in detail. Hardware and software for the experimental system is developed and implemented. The analysed results and the experimental results validate the proposed system. That gives a new solution for the material transportation and processing application using linear synchronous motors

THE RELATIONSHIP BETWEEN TEACHING MATERIALS AND LEARNING OUTCOMES : CASE STUDY OF A COURSE TAUGHT TO CHINESE NATIONALS WORKING IN SINGAPORE

Master'sMASTER OF ART

Extraction and evaluation of antimicrobial activities of essential oils from orange peel (Citrus nobilis) grown in Can Tho City, Vietnam

ABSTRACT: This study determined the extraction conditions, chemical composition, and antimicrobial activities of the essential oils of Citrus nobilis. The results illustrated that soaking in the 9% (w/v) NaCl solution for 2 h with a sample and solvent ratio of 1:3 (w/v) and a subsequent extraction time of 45 min yielded the highest extraction efficiency, reaching 3.66% (w/w). The main chemical components of the essential oils were limonene (90.42%), β-myrcene (4.7%), and α-pinene (1.22%). The minimum inhibitory concentration (MIC) at the density of 5x104, 5x105, and 5x106 cells/mL of Escherichia coli were 100, 125, and 125 mg/mL, respectively; for Staphylococcus aureus were 75, 100, and 125 mg/mL, respectively; and for Bacillus cereus were 50, 75, and 100 mg/mL, respectively. The minimum bactericidal concentration (MBC) at densities of 5x104, 5x105, 5x106 cells/mL of E. coli were 175, 225, 225 mg/mL, S. aureus were 150, 200, 225 mg/mL, and B. cereus were 125, 175, 200 mg/mL, respectively. The inhibitory activities of Aspergillus flavus of orange essential oils according to the agar dilution method at concentrations of 0.025-0.1%) on the 5th day were 8.84-30.61%